WireSpeed SPA Initial Configuration Wizard
This tool will help provision your
SIPURA
phone for
T6000
service.
Instructions:
Important note for SPA-2100: first need to enable** the SPA-2100 device WAN Port Web Server!
Please wait until the device downloads the firmware and configuration files: this may take a few minutes depending on the available network conditions. A flashing led indicates that the device is reconfiguring.
*How To Obtain the Phone IP address
- To obtain the SPA-841 phone IP address:
On the phone dial pad, press the "i" button.
Using the Up/Down Scroll buttons navigate to "Network" and press the Left Soft Key
labeled "Select". The IP address of the phone will be displayed in the "currentIP" field.
- To obtain the SPA-2000 device IP address:
The IP Address can be announced via a telephone connected
to the SPA-2000. You may reach the announcement menu by pressing * * * * on a phone connected
to the SPA-2000. Press 1 1 0 # to have the he IP address read back to you.
- To obtain the SPA-2100 device WAN IP address:
The WAN IP Address can be announced via a telephone connected
to the SPA-2100. You may reach the announcement menu by pressing * * * * on a phone connected
to the SPA-2100. Press 1 1 0 # to have the he IP address read back to you.
**How To Enable the SPA-2100 Device WAN Port Web Server
- To enable the SPA-2100 device WAN Port Web Server:
The WAN Port Web Server can be enabled via a telephone connected
to the SPA-2100. You may reach the announcement menu by pressing * * * * on a phone connected
to the SPA-2100.
Press 7 9 3 2 # to enter the menu Enable/Disable WAN Port Web Server; then press 1 to enable and press 1 again to save setttings.